Our roots as fabricators, racers and tuners date back into the 90’s/early 2000’s with various Nissan, Honda, and Mitsubishi platforms. All PRL Motorsports’ products are made from high-quality materials so that they give your vehicle the look and horsepower boost you are looking for. Whether it’s silicone for longer-lasting hoses and billet aluminum for eye-catching covers or stainless steel to shine up the engine compartment—and be functional at the same time—we have the parts you need. The PRL Motorsports High Volume Intake System Big Bore MAF housing upgrade is the largest MAF housing on the market, rated at 600+ horsepower, and offers a 47% increase in airflow volume over the factory MAF housing or Standard Bore HVI MAF.

Maximize your FK8’s engine intake system and turbocharger potential with the PRL Motorsports Turbocharger Inlet Pipe Kit. This kit is a direct bolt-on upgrade that eliminates intake airflow restriction before the turbocharger, allowing the turbocharger to operate more efficiently. Our design utilizes a cast aluminum inlet piece to allow smooth transition from the gasket-matched 64mm ID compressor inlet to a 80mm OD / 78mm ID outlet throughout the Titanium crossover pipe. This kit is the largest inlet pipe available and offers over a 50% increase in airflow volume in comparison to the factory inlet pipe!

More horsepower translates into better acceleration and faster speed, which means the vehicle can reach its destination quicker. Exhaust components that may become damaged over time from being coated, heat wrapped or otherwise insulated in some capacity are not covered under the PRL Motorsport’s Manufacturer Warranty. Insulating these components can cause heat to cause degradation of the material faster than would normally occur.

PRL HIGH VOLUME DOWNPIPE UPGRADE for CIVIC TYPE R FK8 2017+

The The Parallel price page is just one in Crypto.com Price Index that features price history, price ticker, market cap, and live charts for the top cryptocurrencies. PRL Motorsports is a leader in the Honda aftermarket industry, having developed and manufactured a wide array of performance upgrades for many Honda models. Fits all 2022+ Honda Civic 1.5TFits all variant models including Si, CVT, 6MT, RHD, International Models, Etc. As a company founded by enthusiasts with grassroots racing history dating back into the late 90’s our team understands the importance of keeping Honda’s racing heritage alive. Our goal with the Throwback Strut Bar project was to design a strut bar that was as light and structurally rigid as possible while reminiscent of the OEM strut bar offered on the iconic DC2 Acura Integra Type-R.

Each filter is manufactured by using a four-step, low-pressure injection molding process to bond the rubber base to the interior components. This process virtually eliminates rubber seepage for maximum airflow and aesthetics, unlike other manufacturing methods which can block airflow up to 25%. Our flexible rubber base ensures a consistent, airtight seal, absorbs vibration and withstands millions of heat cycles. You can buy, sell or trade Oyster Pearl (PRL) on more than 10 exchange listed above.

PRL 2017+ FK8 CIVIC TYPE-R BILLET INTERCOOLER UPGRADE

Integral O-rings are used on the outer sleeves of each bushing to provide a tight seal and feel. Fits all 2023+ Honda Civic Type-R FL5Fits all variant models including RHD, International Models, Etc.Fits factory charge piping or pair with PRL Motorsports Charge Pipe Upgrade Kit for the best performance. The Parallel is a cryptocurrency that is highly volatile and therefore may not be suitable for all investors. Perpetual and ETF/Leveraged trading are very risky and are not recommended for non-professionals. Due to rising gas prices and the push for alternative fuel sources, ethanol, derived primarily from corn, has become a common, cost-effective fuel choice. Ethanol has now found its way into most modern gas stations and the community now understands its list of benefits in comparison to gasoline, such as the fact ethanol burns cleaner, cooler and is more resistant to detonation.

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy. If you do not use this spacer, the PRL bracket will not reach the tab on the factory bracket. Properly attaching this bracket ensures the silicone tube will not be touching the factory bracket closest to the front of the vehicle. Our chassis-specific installation kits allow customers to install our Universal Helix Air Oil Separator Kit directly onto their vehicle without any custom fabrication, cutting or modification. The PRL Motorsports aluminum Coolant Expansion Overflow Tank replaces the unattractive, factory plastic tank with this sleek and sturdy aluminum tank that better fits the aesthetics underneath the hood of your car. The internal volume of our Coolant Expansion Tank is equivalent to the factory tank, resulting in no coolant loss.

Because of these characteristics, ethanol is a cheap alternative to expensive race fuels like race gas and/or methanol, especially with high(er) compression factory turbocharged vehicles. In a nutshell, “flex-fuel” allows an internal combustion engine to flexibly utilize one or more different fuels (usually gasoline blended with either ethanol or methanol fuel), and both fuels are stored in the same common fuel tank. Flex-Fuel systems utilize an ethanol content analyzer to determine the amount of ethanol in a fuel system and a converter to send this reading to the vehicle’s ECU to instantaneously adjust for varying fuel mixtures.

When it comes to delivering innovative solutions for a Honda Civic or Accord, we believe in taking a holistic approach. When a car’s engine is tuned to run at its optimal level, it can make the most of each drop of fuel. You can store coins on exchanges after purchase but we recommend using a dedicated wallet for security and long term storage. They are the best choice for those storing a lot of value or planning to hold long term. The basic mode of fire for the P.R.L. 412 is a short-ranged pulse of light, which damages and stuns enemies, much like a flash grenade. It can also kill some creatures with just the flash, like the Verdugo and even Osmund Saddler.

Pair this with our 3″ Front Pipe Upgrade for maximum exhaust flow and performance! All kits will include premium hardware, components and gasket for seamless installation. Specially designed, lightweight filter lubricant is designed to be vehicle sensor-friendly and create a positive (+) magnetic charge, or ionic bond, with the filter’s stainless steel mesh. This positive charge attracts negatively (-) charged dust particles from entering the filter, causing them to stick to the stainless steel mesh, which allows the cotton to remain clear for maximum airflow. All of PRL Motorsports’ products are reasonably priced and come with everything you need to get started. For example, the intake manifold kit for the Honda and Acura comes with the cylinder head adapter, throttle body spacer, the BSPT plug for the coolant air assist valve, the O-rings, hoses and studs and bolts that are longer, if needed. You won’t have to hunt down any special parts, including hard-to-find special bolts, to make these kits work.

The PRL Motorsports Stage 1 Intake System offers great gains at an affordable price. This kit replaces the corrugated factory inlet hose with our better looking, smoother flowing 4-ply silicone hose and high flow air filter. The pleats found in the factory hose disrupts air flow, which limits power potential and throttle response. PRL Motorsports was founded in 2007 with an innovative approach and need for speed.

Shipping & Storage

Improve shifter stability and precision shifting with the PRL Motorsports Shifter Base Bushing Upgrade. This upgrade replaces the OEM rubber bushings and replaces them with solid 6061 anodized aluminum inserts for increased rigidity and longevity. Improve shifter stability, bushing longevity and reduce cable-binding with the PRL Motorsports Shifter Cable Bushing Upgrade. This upgrade replaces the OEM rubber bushings and replaces them with a combination of 6061 anodized aluminum inserts and Delrin sleeves for increased rigidity and longevity. Delrin is a resistant to most chemicals and self-lubricating, which is perfect for shifter bushings.

Our Intake Conversion Hose allows customers to use Honda’s factory FK8 Civic Type-R turbocharger inlet pipe or the PRL Motorsports Turbocharger Inlet Pipe Upgrade kit with their 2018+ Honda Accord 2.0L Turbo when using the PRL Motorsports High Volume Intake System. This kit replaces the corrugated factory inlet hose with our better looking, smoother flowing 4-ply silicone hose. Aside from the 3-bolt front-pipe flange, all connections are slip-fit connections for adjustment and packaging purposes. We elected to use a muffler clamp / exhaust hanger to support the muffler instead of welding on a hanger for longevity, adjustment and serviceability. All components are TIG welded and fully back-purged to withstand exhaust gas temperatures and outside elements.

The PRL Motorsports front pipe upgrade promotes optimal airflow and is recommended for customers looking to push his or her 2017+ Honda Civic Type-R even further. The front pipe is the first component in the exhaust path after the end of the emissions control system. Our expansion tank is constructed of TIG-welded, 3mm thick aluminum and anodized gloss black durability. Each tank includes a billet aluminum cap, sight glass and custom lower fitting to fit the factory coolant line. This kit requires no modification for installation and reuses all factory hardware. The PRL Motorsports front pipe upgrade promotes optimal airflow and is recommended for customers looking to push his or her 2023+ Honda Civic Type-R even further.

The Parallel Price (PRL)

We also take great pride in offering the best experience to our customer every step of the way. Our aftermarket parts also improve the look and feel of your Honda Civic or Accord. Our carbon fiber induction system is both lighter and more rigid than factory plastic intake systems companies that accept crypto and improves throttle response while looking great under the hood. PRL Motorsports Performance Parts is a top supplier of high-performance parts and accessories. We offer quality products and easy layaway terms to help you get the additional racing parts or upgrade your vehicle.

High-quality products mean a better experience, better performance, and longer life. With premium aftermarket parts, you’re getting higher quality and more accurate engineering than with generic parts. PRL does not just design a product and then throw it in a box to sell at random — we make sure it works the best it can for your vehicle. PRL intercoolers are carefully engineered with precise fins that work well with their intended turbochargers and piping.

Why not participate in the Explorer Program, and we will show your contribution here. If you would like to share your results with us, the Explorer Program offers a 25µl vial free of charge with your next order. Whether you want to dominate at the track or get more driving enjoyment out of a Saturday road trip, we’ll point you toward PRL Motorsports components that will help you meet your goals. We’ll share all the tips and tricks we’ve learned and guide you to a successful installation. At PRL Motorsports, we’re always trying to stay one step ahead of the competition.

The PRL Motorsports Throwback Strut Bar increases chassis strength, rigidity, and drastically reduces body flex to improve vehicle handling. Factory mounting points are retained for ease of installation and to meet various racing class specifications, such as SCCA Street Touring. Fits all 2022+ Honda Civic 1.5TFits all 2023+ Honda Accord 1.5TFits all 2023+ Acura Integra 1.5TFits all variant models including Si, CVT, 6MT, RHD, International Models, Etc. Fits all 2023+ Acura Integra 1.5TFits all variant models including Base, A-Spec, Technology, CVT, 6MT, RHD, International Models, Etc. Fits all 2022+ Civic 1.5L Turbo & 2.0LFits all variant models including Si, CVT, 6MT, RHD, International Models, Etc. Are you using our products in an application or species we have not yet tested?

On top of saving on the kits themselves, if you spend over $249, we offer free shipping and insurance. At Two Step Performance, we have the direct bolt-on cold air intake system for the 2016+ Honda Civic 1.5T. This CAI is designed using extensive knowledge in airflow dynamics and restriction reduction, resulting in a perfectly engineered intake system that provides your Civic with cooler, denser air for maximum power gains. The unique design improves throttle response and increases horsepower and torque throughout the entire power band while providing an aggressive intake note under hard acceleration.

• PRL intercoolers are carefully engineered with precise fins that work well with their intended turbochargers and piping.
• PRL Motorsports was founded in 2007 with an innovative approach and need for speed.
• The The Parallel price page is just one in Crypto.com Price Index that features price history, price ticker, market cap, and live charts for the top cryptocurrencies.
• Our goal with the Throwback Strut Bar project was to design a strut bar that was as light and structurally rigid as possible while reminiscent of the OEM strut bar offered on the iconic DC2 Acura Integra Type-R.
• Ethanol has now found its way into most modern gas stations and the community now understands its list of benefits in comparison to gasoline, such as the fact ethanol burns cleaner, cooler and is more resistant to detonation.
• Properly attaching this bracket ensures the silicone tube will not be touching the factory bracket closest to the front of the vehicle.

Our engineers were able to profile the volute and locate the MAF sensor flange in the optimal location to help keep fuel trims extremely stable. This will require a tune/MAF scaling and is only compatible with our High Volume Intake System. This upgrade is more-so intended for customers looking to make over 450 horsepower.Customers can also convert from Big Bore MAF housing to Standard Bore MAF housing.

Each kit utilizes a large spherical bearing to allow for 2-axis of movement and minimize wear while eliminating the chance of binding that other aftermarket options can cause. We designed the aluminum inserts in both bushings to feature machined index-grooves, which secures each bushing to the metal stud. Retaining a fixed position, like the factory bushings, was a key goal during development. This feature ensures that the bushing cannot prematurely wear from freely move around on the inner metal stud, unlike other aftermarket options. Our design also retains the factory approach of a multi-piece smaller bushing. This allows for all movement to be contained within Delrin sleeves, which drastically reduces wear.